Install Smart PSS Lite and connect your Dahua Cameras

Download the newest version of Smart PSS Lite and install it on your computer.

https://dahuawiki.com/SmartPSS_Lite

Step 1: Access Settings on Your NVR (If you have the SN/serial number, skip to Step 2)

1. Login to Your NVR:
   • Using a connected monitor or computer, log in to your NVR (your camera recorder).
   • Enter your admin credentials (e.g., admin / password1234).
2. Go to Network Settings:
   • After logging in, navigate to the Settings page.
   • Look for Network settings.
3. Find the P2P Option:
   • Inside the Network section, find P2P (Peer-to-Peer) settings.
   • You should see a QR code displayed along with your device’s SN/serial number.

Step 2: Set Up Smart DMSS Lite on Your Computer

Once you have the software installed.

1. Create Login and Password:
   • Create your own User Name and Password for the software and select the Auto Login Option.
2. Add Your NVR:
   • Now you are at the Home screen, now we need to add the NVR.
   • In the bottom left of the screen select Devices, then press +Add at the top.
   • Give the NVR a custom Name.
   • Switch from IP/Domain Name to SN and enter in the SN (Serial Number).
   • Enter Username and Password for your NVR (this will be different then the software login you created earlier), then press Add.
3. Live View:
   • Go back to the Home tab and select Live View.
   • On the left side of the screen you will see your NVR. Double click on the name and the cameras will now be displayed on the right.