You will need to download and install TruVision Navigator on your computer first, then you can add your NVR to TruVision Navigator.

Download Link: https://drive.google.com/drive/folders/1Sp-wUE4LB4reQ3-F0HnuT7TrKyh0Oscc?usp=sharing

Here's a more detailed breakdown:

1. Prerequisites:

• Network Connectivity:

  Make sure your NVR is connected to the network that has internet access. (Ports 80, 8000, 554 will need ) 

• TruVision Navigaor:

  You'll need TruVision Navigator software installed on your computer. 

• NVR Credentials:

  Have the IP address, username, and password for your NVR readily available.

2. Adding the NVR to TruVision Navigator:

• Open TruVision Navigator: Launch the TruVision Navigator application.
• Login: Enter user name "admin" and password "admin"
• Create New Login: Now you can create your own login to access the software, this can be separate from the login credentials for the NVR.
• Add Device: Right click on the word "Devices" in the top left of the screen.
• Add Device, then Add Manually.
• Enter Device Information:
  • Device Type: Select the appropriate device type (usually "TruVision NVR").
  • Device Title: Give a name to your NVR
  • Device Address: Enter the Public IP address of your NVR. If you are accessing the system locally use the local IP.
  • Device Port: Default port is 8000
  • Streaming Type: Usually set for TCP
  • Username: Enter the NVR's username. 
  • Password: Enter the NVR's password. 
• Click OK: Click "OK" to add the device. 

3. Verification:

• Check the Navigator Tree:

  After adding the NVR, verify that it appears in the Navigator tree within TruVision Navigator. 

• Test Live View:

  Ensure you can access live video feeds from the cameras connected to the NVR through TruVision Navigator.