Add the NVR to the App

1. Open the ADTVR Go app.
2. Tap the three lines at the top of the screen.
3. Select the third icon (blue folder picture of NVR).
4. Under the Devices tab, press the “+” button in the top right corner.
5. Enter the following details:
   • Alias: NVR
   • Address: 
   • Port: 8000
   • Username: admin
   • Password: 123456 or SecurU4634
6. Press Save in the top right corner.

The app should now connect to the NVR, allowing you to view your cameras while on the same network.