-
Reconnect Alarm.com Cameras to a New Network
Please follow the steps below to reconnect your Alarm.com cameras to your new Wi-Fi network. AP Mode Setup: * Make sure the camera’s AC adapter is plugged into a non-switched outlet . * Wait for the LED to blink white . If the LED is not white after 2 minutes, press and hold the WPS/Reset button and rel…
-
Connecting the ADC VDB770 Video Doorbell to the network
To connect your video doorbell (ADC-VDB770) to your network, please follow the steps below: AP Mode 1. The camera is in Access Point (AP) mode when the button LED is blinking white. If necessary, access AP mode by holding down the doorbell button for 35-40s and release when the LED turns to blinking white. 2…
